CERESIT CT 74-Full Silicone Render-25kg

CERESIT CT 74-Full Silicone Render-25kg

Original price was: £89.99.Current price is: £71.99.

20% Off

Full silicone render, stone structure, grain 1.5, 2.0 or 2.5 mm

Decorative thin-layer render for outdoor applications.

Description

Ceresit CT 74 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 74 as façade plaster within Ceresit ETICS (External Thermal Insulation Composite Systems) with the use of EPS-boards (Expanded Polystyrene boards) and mineral wool. CT 74 plaster is recommended to be applied to the partitions where high permeability is required.

CT 74 is available in a wide range of colours, but in case of intense dark colours, the material application on the façades should be limited to small areas, e.g. architectural details. Plaster CT 74 is protected form biological paralyses, e.g. fungus, mould and algae.

PROPERTIES

  • highly self-cleaning
  • highly resistant to dirt
  • hydrophobic
  • very low water absorption and high vapour permeability
  • high durability
  • high elasticity and impact resistance
  • highly resistant to weather conditions
  • high stability of colour
  • BioProtect formula – resistant to fungi, algae and mould
  • possibility of machine application
  • available in full palette of Ceresit Colours of Nature®

STEP BY STEP

The whole content of the container should be carefully stirred. If the need appears, it is possible to adjust the product consistency to the application conditions by adding a small amount of clean water and mixing again. Neither rusty containers nor tools can be used. CT 74 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements by means of a plastic long float fl atly held to achieve the appearance densely laid out aggregate grains structure.

Do not sprinkle plaster with water!

Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working, the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fi xed place. The edge of the previously applied plaster can be protected with selfadhesive tape.

Technical Data Sheet

Ceresit CT 74

Additional information

Weight 25 kg
Dimensions 40 × 40 × 40 cm
Grain

DOT 1.5mm, DOT 2.0mm, DOT.2.5mm, Transparent base-DOT 1.5mm

You may also like

  • WIM SEALING MAT

    Price:

    £10.74

  • FOX DEKORATOR PEARL RELIEF 1KG

    Price:

    £74.04

  • FOX DEKORATOR GALAXY EFFECT

    Price:

    £109.26

  • WIM Screeding Max30-25kg

    Price:

    £23.94

  • CERESIT WHITETEQ foam-750ml

    Price:

    Original price was: £16.66.Current price is: £12.68.

    24% Off

Title

Go to Top