WC Concealed Installation Kit

A set for building WC frames is a modern product – lightweight, multifunctional, clean, easy to transport, and simple and quick to work with. It is also extremely durable, with high load-bearing capacity and stiffness of the constructed frame. It is resistant to water and provides good thermal and acoustic insulation.

• Ideal surface for ceramic tiles, mosaics,
• Complete waterproofing (both sides of the frame and the core are waterproof)
• Excellent thermal insulation (prevents water condensation)
• Excellent acoustic insulation (reduces noise from filling and overflowing water)

The product is designed for building most of the concealed toilet frames and suspended sanitary fittings.

HOW TO QUICKLY AND MODERNLY BUILD A CONCEALED TOILET FRAME?

1. Measure the front panel starting from aligning it with the holes in the concealed frame set, which are properly secured.
2. After considering the floor level and the final height of the set, cut off the excess material.
3. Mark the position for the flush button on the front panel and cut out the hole.
4. Apply WIM STRONG adhesive-sealant to the side edges of the frame and press the panel against it.
5. Place galvanized washers on the self-tapping screws and use them to reinforce the connection of the panel to the frame.
6. Install the front panel, followed by the top panel, similarly as in steps 4 and 5.

More information:

Composition: The core of the board is made of extruded polystyrene (XPS) in compliance with PN-EN 13164:2010 standard. It is reinforced on both sides with fiberglass mesh and covered with a high-quality cementitious mortar enriched with modified synthetic resins.

Declared thermal conductivity coefficient – λD: λ design value according to Z-23.15-1476: DIN 4108-1, 0.03

d = 6 mm: 0.029

d = 12 mm: 0.029

d = 20 mm: 0.029

d = 30 mm: 0.029

d = 50 mm: 0.029

Apparent density of the core: ≥ 30 kg/m³

Compressive stress at 10% deformation: ≥ 0.3 MPa

Water absorption:

• after 1 hour: ≤ 1 kg/m²
• after 24 hours: ≤ 1 kg/m²

Tensile strength perpendicular to the front surface:

• after 28 days under laboratory conditions: ≥ 0.4 MPa
• after 7 days under laboratory conditions and 21 days in water: ≥ 0.4 MPa
• after 7 days under laboratory conditions and 14 days at +70°C: ≥ 0.4 MPa
• after 7 days under laboratory conditions and 21 days in water, followed by 25 cycles of freezing and thawing in water: ≥ 0.14 MPa

Temperature range of use: -50°C / +75°C

Reaction to fire class: E

Available Dimensions

• Mainboard with cut-out holes – 20x600x1200 mm
• Side plates, 2 pcs. – 20x180x1200 mm
• Top plate – overlay – 20x200x600 mm