WIM Screeding Max30-25kg

It is recommended for leveling the substrate before laying ceramic tiles, natural stone, parquet, laminate and wooden floor panels, textile carpets, linoleum, and PVC. It can be used on commonly encountered substrates (old and new) such as concrete, cement screed, or anhydrite screed, including those with underfloor heating installed.

PROPERTIES:

• Thickness of the layer: 3 to 30 mm.
• Rapid drying: Foot traffic possible after 4 hours.
• Used for substrate leveling.
• Suitable for under parquet and floor panels.
• Suitable for textile carpets and PVC.
• Suitable for ceramic tiles and natural stone (installation after 24 hours).
• Compatible with underfloor heating systems.
• Product classified as CT-C30-F7 according to PN-EN 13813 standards.

More ionformation:

Referring to the temperature: +23°C (±2) and air humidity of 50% (±5)

Operating and substrate temperature: from +5°C to +25°C

Bulk density (dry mixture): approximately 1.2 kg/dm3 Bulk density (after mixing): approximately 2.0 kg/dm3

Mixing proportions: 5.00 – 5.50 liters of water per 25 kg of mortar (0.20-0.22 liters of water per 1 kg of mortar)

Working time (consumption of prepared mortar): approximately 40 minutes

Layer thickness: 3 – 30 mm

Compressive strength: ≥ 30.0 MPa Flexural strength: ≥ 7.0 MPa Shear strength: ≥ 1.0 MPa

Linear shrinkage: ≤ 0.06%

Foot traffic ability: after 4-6 hours

Ceramic tile installation: after 24 hours Installation of parquet, panels, textile floor coverings, and PVC: approximately 7 days

Underfloor heating activation: approximately 7 days

Full curing and drying time: 7 days

The product meets the requirements of the PN-EN 13813 standard as type CT-C25-F7.

The consumption is approximately 1.65 kg of dry mortar per 1 m2 for every 1 mm of layer thickness.